Configuration command for the behavior of the CAM solver is opened from the part editing environment of Autodesk Inventor and moving on to the Woodwork CAM module:
Opening the Command
Woodwork CAM -> CAM Behave 
1. |
|
Application Settings |
A tab used to enter and store general application settings. |
2. |
|
Create Document Settings |
A tab used to enter and store settings of the opened part. If the part has the defined settings, the tab is marked with additional sign |
3. |
|
General Settings |
A tab containing general settings for automatic generation of CNC technologies. For more information, click here. |
4. |
|
Part Clamping Settings |
A tab containing settings for the clamping of the part in the CNC machine. For more information, click here. |
5. |
|
Drilling Operation Settings |
A tab containing drilling operation settings. For more information, click here. |
6. |
|
Milling Operation Settings |
A tab containing milling operation settings. For more information, click here. |
7. |
|
Pocketing Operation Settings |
A tab containing pocketing operation settings. For more information, click here. |
8. |
|
Grooving Operation Settings |
A tab containing grooving operation settings. For more information, click here. |
9. |
|
Cutting Operation Settings |
A tab containing cutting operation settings. For more information, click here. |
. The settings can be deleted by clicking on the sign and the part will be processed in accordance with the general settings. Priority is always given to the part settings rather than the general application settings.
