This command is used to create panel bodies based on the selected face of the existing panel body.
Opening the Command
The command can be opened only in the part design environment.
Skeleton Dress Up –> Clone 
Once the command has been activated, it is first necessary to select the face of the existing panel body; new panel body will be created in parallel with it.
Offset - select the distance of shifting the imaginary reference face used as a reference point for creating the panel body.
- direction of shifting the reference face, which can be reversed.
There are the following options available for the position of the panel body with regard to the reference plane:
- the panel body will be created in the negative direction from the normal of the imaginary plane. The normal of the imaginary plane will coincide with the normal of the selected panel plane.
- the panel body will be created in the positive direction from the normal of the imaginary plane.
- the panel body will be created symmetrically to the imaginary plane.
Thickness - indicates the thickness of the panel.