Fields describing component |
Top | Previous | Next |
As mentioned in the section entitled Component data in BOM specifications, each Autodesk Inventor component (Assembly, Part) is represented by a certain data container in the Woodwork for Inventor BOM generator. This data can be arranged in the BOM table columns by indicating what datum needs to be exported to which table column. Each datum, or, in other words, each component attribute, has its own name. These attributes are listed in the table below.
Fields defining component |
Explanations |
|---|---|
Autodesk Inventor Properties |
Component fields are obtained from Autodesk Inventor component properties fields |
Item.Code |
Part code |
Item.Name |
Part name |
Item.Type |
Component type. Value options: Part, Sheet Metal, Sweep Profile |
Item.BomType |
Component type based on Inventor BOM classification. Value options: Normal, Inseparable, Purchased |
Item.Quantity |
Quantity of the defined component in the assembly |
Item.Length |
Component length |
Item.Width |
Component width |
Item.Thickness |
Component thickness |
FillWorkpiece |
Fill workpiece description |
Item.FillWorkpiece.Code |
Fill workpiece code |
Item.FillWorkpiece.Name |
Fill workpiece name |
Item.FillWorkpiece.Type |
Fill workpiece type. Value options: Single, Composite, Multilayer |
Item.FillWorkpiece.Length |
Fill workpiece length |
Item.FillWorkpiece.Width |
Fill workpiece width |
Item.FillWorkpiece.Thickness |
Fill workpiece thickness |
FillWorkpiece.Material |
Fill material description |
Item.FillWorkpiece.Material.Code |
Fill material code |
Item.FillWorkpiece.Material.Name |
Fill material name |
Item.FillWorkpiece.Material.Type |
Fill material type. Value options: Solid, Board, Laminated Board, Multilayer Board, Desktop, Rod |
Item.FillWorkpiece.Material.Length |
Fill material length |
Item.FillWorkpiece.Material.Width |
Fill material width |
Item.FillWorkpiece.Material.Thickness |
Fill material thickness |
Item.FillWorkpiece.Material.Added Property.<Prop.Name> |
Added property of fill material obtained during material replacement from the MS Excel file. |
Item.FillWorkpiece.Material.Color.Name |
Fill material color name. Apply only to Laminated Board and Desktop materials. |
Item.FillWorkpiece.Material.Color.Code |
Fill material color code. Apply only to Laminated Board and Desktop materials. |
Item.FillWorkpiece.Material.Color.AddedProperty.<Prop.Name> |
Added property of fill material obtained during material replacement from the MS Excel file. |
Item.CoverWorkpiece.{SN}.Material.HasGrain |
Fill grain direction indicator. Value options: True, False |
CoverWorkpiece |
Cover material description |
{SN} => "Left";"Right";"Front"; "Back";"Top";"Bottom" |
Cover material side identifier. Click here for more information about side identification. |
Item.CoverWorkpiece.{SN}.Material.Code |
Cover material code. |
Item.CoverWorkpiece.{SN}.Material.Name |
Cover material name |
Item.CoverWorkpiece.{SN}.Material.Type |
Cover material type. Value options: Veneer, Edge Band, Paint |
Item.CoverWorkpiece.{SN}.Material.Length |
Cover material length |
Item.CoverWorkpiece.{SN}.Material.Width |
Cover material width |
Item.CoverWorkpiece.{SN}.Material.Thickness |
Cover material thickness |
Item.CoverWorkpiece.{SN}.Material.AddedProperty.<Prop.Name> |
Added property of cover material obtained during material replacement from the MS Excel file. |
Item.CoverWorkpiece.{SN}.Material.Color.Name |
Cover material color name. Applicable only to Laminated Board and Desktop materials. |
Item.CoverWorkpiece.{SN}.Material.Color.Code |
Cover material color code. Applicable only to Laminated Board and Desktop materials. |
Item.CoverWorkpiece.{SN}.Material.Color.AddedProperty.<Prop.Name> |
Added property of cover material color obtained during material replacement from the MS Excel file. |
Item.CoverWorkpiece.Count.CoversByLength |
Quantity of cover material by part length. E. g. a part edge banded on both sides along its length direction, will generate number 2. |
Item.CoverWorkpiece.Count.CoversByWidth |
Quantity of cover material by part width. E. g. a part edge banded only on the back along its width direction, will generate number 1. |
Item.CoverWorkpiece.Count.CoversByThickness |
Quantity of cover material by part thickness. E. g. a part covered with a veneer on both sides, will generate number 2. |
Item.CoverWorkpiece.LengthUndescore |
Fill workpiece length transferred to MS Excel with double or single underlining or without underlining, depending on the number of edge bands along this direction. |
Item.CoverWorkpiece.WidthUndescore |
Fill workpiece width transferred to MS Excel with double or single underlining or without underlining, depending on the number of edge bands along this direction. |
Item.CoverWorkpiece.ThicknessUndescore |
Fill workpiece thickness transferred to MS Excel with double or single underlining or without underlining, depending on the number of edge bands along this direction. |
Item.CoverWorkpiece.{SN}.Material.HasGrain |
Cover material grain direction indicator. Value options: True, False |
Header |
Order header characteristic included in the component description structure |
Item.ManufacturingOrderCode |
Component manufacturing order code |
Item.ManufacturingOrderName |
Component manufacturing order name |
Item.SalesOrderCode |
Component sales order code |
Item.SalesOrderName |
Component sales order name |