Autodesk Vault integration procedure at file meta-data level

Let us assume that we want to see the following characteristics generated by Woodwork for Inventor in file meta-data:

1.Length - length of part of a piece of furniture.

2.Width - width of part of a piece of furniture.

3.Thickness - thickness of part of a piece of furniture.

4.Material Code - material code.

5.Color Code - color code of the material.

Open any Woodwork for Inventor assembly and configure the default Custom iProperties fields.

Woodwork Design -> Design Settings

Custom iProperties

Select Custom iProperties fields, for which values generated by Woodwork for Inventor BOM generator are recorded. Values are assigned by indicating keywords used in Woodwork for Inventor BOM generator. For more information on keywords, click here. Before closing the dialog box, be sure to select Write BOM data to mapped iProperties on a BOM close option.

To check, whether correct keywords have been indicated, open Woodwork for Inventor BOM generator. When BOM is completed, close BOM generator. Now, when you open any part, you should be able to view values entered in the specified Custom iProperties fields.

To do this, you must have administrator rights.

From the pull-down menu, go to the administration window of additional property fields:

Tools -> Administration -> Vault settings -> Behaviors -> Edit and Mange Properties -> Properties

Click "New" and create new meta-data, i.e. Property, field.

Specify the necessary parameters of the new property field:

▪Name: name of the property field.

▪Type: type of property, which depends on the type of property to be taken from Custom iProperties field. It can be a piece of text or a number.

▪Associations: specifying Autodesk Vault-type information, with which this property can be used in meta-data. Property newly created in Autodesk Vault Professional system can be associated with files, BOM items or project catalog. In our case, new property needs to be associated with a file.

For these data to be transferred from Custom iProperties field to the appropriate Autodesk Vault property field, it is necessary to perform Mapping. Mapping is performed in the same window, in which the relevant Autodesk Vault property was created; simply go to Mapping tab. Mapping can also be performed later, when editing the description of custom field.

Detailed description of property mapping between Autodesk Vault system Properties and Custom iProperties file is given in the Help system of Autodesk Vault. In our case, it is necessary to indicate that Provider of the property being mapped will be Autodesk Inventor program file. Then, it is necessary to read the value of specified Custom iProperty field from the file. Be sure to indicate that the direction of data flow is from Autodesk Inventor file to the configured property.