Printing

Shape nesting results may be printed. The selected sheet or selected piece instance may be printed or exported.

Nesting Print Ribbon

	Sheet	The image of the selected sheet is printed according to the provided printing settings.
	Piece	The selected piece instance is printed according to the provided printing settings.
	Instance by Picking	Special printing mode which allows printing part instance labels by selecting the instances on the raw material sheet using the cursor. The printed instance is shown in a different colour. This way, the user can print a label after a label clearly seeing its location in terms of the sheet. The content of the label is exported using the BOM template, which is specified in the printing settings.
	Sheet by Picking	A special print mode that allows you to print labels for the entire sheet of raw material by selecting the desired sheet with the cursor.
	Sheet	Saves the image of the selected sheet in the form of an image file. Image parameters are taken from the printing settings.
	Instance	Saves the image of the selected piece instance as an image file. Image parameters are taken from the printing settings.
	Setup	Settings for printing and exporting to image files.

Nesting Print Setup Header

▪Sheet

Nesting Image to file setup

Save To

Allows setting the path where the image file should be saved. A specific path may be indicated or the file may be saved in the active directory, from which the given shape nesting file was opened..

Action if file with same name already exist

Instructions on what to do if the file has the same name as an existing file. The user can request to:

▪Skip save - keep the original file and do not save the new file.

▪Overwrite existing file - save over the existing file.

▪Save file with count sufix - save the file and add a count suffix.

Canvas Size

Sets the image space in pixels and defines the margin size.

Output

Image Name

Allows to create a file name template. The template is created using a combination of keywords. The item type is considered to be “sheet”.

Extension

Setting the format of exported image. Two formats are currently available:

▪PNG

▪SVG

Output Range

Defines what is exported during saving:

▪Current Sheet - current selected raw material sheet.

▪All Sheets of Current Material - all raw material sheets in the current material worktop.

▪All Sheets - all current shape nesting sheets.

Fonts

Sets the fonts and their size for exported text information.

Shade Options

Allows setting the way the image is rendered, if the image is presented in the form of a wire model.

View Options

Allows adjusting additional content to be included in the exported image.

Show Dimensions	Exports the dimensions of the piece instance.
Show Titles	Exports label header at the centre of the piece instance.
Show Nesting Route Tool Path	Shows the outer contour milling tool route of the piece instance.
Show Inner Tooling Trajectories	Shows the inner milling tool routes of the piece instance.
Show Edge Bands	Highlights the edges with edge bands. The edge band thickness may be set additionally.

▪Piece Instance

Nesting Piece Instance Image setup

Save To

Allows setting the path where the image file should be saved. A specific path may be indicated or the file may be saved in the active directory, from which the given shape nesting file was opened..

Action if file with same name already exist

Instructions on what to do if the file has the same name as an existing file. The user can request to:

▪Skip save - keep the original file and do not save the new file.

▪Overwrite existing file - save over the existing file.

▪Save file with count sufix - save the file and add a count suffix.

Canvas Size

Sets the image space in pixels and defines the margin size.

Output

Image Name

Allows to create a file name template. The template is created using a combination of keywords. The item type is considered to be “instance”.

Extension

Setting the format of exported image. Two formats are currently available:

▪PNG

▪SVG

Output Range

Defines what is exported during saving:

▪Current Instances - current selected piece instance.

▪All Instances of Current Material - all piece instances in the current material worktop.

▪All Instances - all current shape nesting piece instances.

Fonts

Sets the fonts and their size for exported text information.

Shade Options

Allows setting the way the image is rendered, if the image is presented in the form of a wire model.

View Options

Allows adjusting additional content to be included in the exported image.

Show Dimensions	Exports the dimensions of the piece instance.
Show Titles	Exports label header at the centre of the piece instance.
Show Nesting Route Tool Path	Shows the outer contour milling tool route of the piece instance.
Show Inner Tooling Trajectories	Shows the inner milling tool routes of the piece instance.
Show Edge Bands	Highlights the edges with edge bands. The edge band thickness may be set additionally.

BOM templates may be created for shape nesting and used to generate the desired BOMs. The user can use certain keywords in the templates to request that the graphical image of the whole sheet or individual piece instance be exported to the desired BOM cell. The image to be generated is configured in this branch.

▪Sheet

Nestin Image to Excel Sheet Setup

Canvas Size

Sets the image space in pixels and defines the margin size.

Fonts

Sets the fonts and their size for exported text information.

Shade Options

Allows setting the way the image is rendered, if the image is presented in the form of a wire model.

View Options

Allows adjusting additional content to be included in the exported image.

Show Dimensions	Exports the dimensions of the piece instance.
Show Titles	Exports label header at the centre of the piece instance.
Show Nesting Route Tool Path	Shows the outer contour milling tool route of the piece instance.
Show Inner Tooling Trajectories	Shows the inner milling tool routes of the piece instance.
Show Edge Bands	Highlights the edges with edge bands. The edge band thickness may be set additionally.

▪Piece Instance

Nesting Image To Excel Piece Instance Setup

Canvas Size

Sets the image space in pixels and defines the margin size.

Fonts

Sets the fonts and their size for exported text information.

Shade Options

Allows setting the way the image is rendered, if the image is presented in the form of a wire model.

View Options

Allows adjusting additional content to be included in the exported image.

Show Dimensions	Exports the dimensions of the piece instance.
Show Titles	Exports label header at the centre of the piece instance.
Show Nesting Route Tool Path	Shows the outer contour milling tool route of the piece instance.
Show Inner Tooling Trajectories	Shows the inner milling tool routes of the piece instance.
Show Edge Bands	Highlights the edges with edge bands. The edge band thickness may be set additionally.