Exporting specifications to the drawing

Top | Previous | Next

 

The drawings of furniture often require various digital/text information to be provided in the form of tables, which is generated by Woodwork for Inventor BOM generator. Woodwork for Inventor Auto Plot drawing template can be configured for exporting such table. In order to perform such configuration, the following is necessary:

 

1.Have a properly aligned Woodwork for Inventor BOM template.

2.Using Autodesk Inventor styles in the AutoPlot template, create a table, where BOM data will be exported in the drawing.

3.Perform configuration in the AutoPlot drawing template, which includes:

a.Setting the Woodwork for Inventor template, which will be used to include exported data in the table.

b.Setting the table, where the data will be exported in the drawing.

c.Setting the position of the table in the drawing.

d.Providing the sheet format, if the table does not fit on the master drawing and has to be printed on a separate sheet.

 

Specification export to the drawing can be configured for both the assembly and the part separately. In addition, export of multiple tables can be configured.

 

BOM to drawing setup

 

hmtoggle_plus1Requirements for BOM template and linking to the drawing template

 

There are no specific limitations for the BOM template. Please note that exported data will be transferred to the Autodesk Inventor drawing table. Therefore, one sheet must contain one table rather than several areas of the sheet with separate tables. Exported data are taken from the first row {Table.DataDesription(<Data Filter>}. Furthermore, formulas and VBA macros system that additionally processes the exported data in the table cannot be used in this template. The template can provide for the export of multiple tables on separate sheets, but the specific linking of the Autodesk Inventor table can only be done with a single table on a single sheet.

 

BOM template file

Open file Open dialog - file opening dialogue box is opened. Select the MS Excel BOM template file.

 

Failo redagavimas - the current file is opened for editing with MS Excel.

 

 

Sheet selector - specifying the MS Excel sheet containing the template of exported data.

 

 

Columns count to read (0- All) - specify how many columns (starting with the first column) of the exported table should be included in the exported drawing. The template table can have more columns than there are planned columns to be exported to the drawing table. ‘0’ means that all columns will be included.

 
hmtoggle_plus1Creating an Autodesk Inventor table style and linking with BOM temlate

 

The form of the table exported to the drawing is defined by creating a new Autodesk Inventor table style. An example is provided below.

 

AutoPlot Table definition

 

Table Style - select one of the existing styles of the table from the drop-down list. The data of the above BOM will appear in it.

 
hmtoggle_plus1Table position in the drawing

 

Table placement corner

Shows from which angle the table position in the drawing is linked.

Offset from corner

Table position sliding size from the given angle.

Separate sheet for table

If the table is very large, specify that it has to be exported to a separate sheet of the drawing.

 

"Rows count for new sheet" - allows specifying the maximum number of table rows of the table to be placed on the same sheet as the component drawing. If the number of rows is exceeded, the table is automatically placed on a separate sheet. The format of such sheet is specified by selecting the Sheet format from the drop-down list.