As mentioned above, the content of BOM columns is entered using keywords included in the template. Correct specification of keywords can be ensured by Keywords Auto Complete.
Woodwork for Inventor keywords system is available below.
Writing legend:
Slanted Bold text - means the name of keywords section. This name is not a keyword operand.
Slanted text - means a short explanation of value delivered by keyword or possible value delivered by keyword.
Product Customer Name ContactPerson FirstName LastName Phone SalesManager Name ContactPerson FirstName LastName Phone Designer FirstName LastName Phone Constructor FirstName LastName Phone DesignStatus Start StartDate Finish FinishDate End EndDate RejectReason ManufacturingStatus Start StartDate Finish FinishDate End EndDate RejectReason SalesOrderCode SalesOrderName ManufacturingOrderCode ManufacturingOrderName ManufacturingOrderDate Shipdate IsPaidUp
|
Item Code - Assembly Component iProperty "Part Number" value. For Purchased components this value can be replaced with another one by Material Replace procedure. Name - Assembly Component iProperty "Description" value. For Purchased components this value can be replaced with another one by Material Replace procedure. Original Code - Assembly Component iProperty "Part Number" value Name - Assembly Component iProperty "Description" value Number - Order number in current assembly BOMType - Possible values: Normal Purchased Inseparable Phantom Reference Quantity - Amount of occurences in a product Type - Possible values: Assembly Welded Assembly CategoryName - return value: Assembly CustomiProperty <Custom iProperty Name> - Gets specified component iProperty. Access to Product Properties ManufacturingOrderCode - Manufacturing Order Code specified in Product Properties. ManufacturingOrderName - Manufacturing Order Name specified in Product Properties. SalesOrderCode - Sales Order Code specified in Product Properties. SalesOrderName - Sales Order Name specified in Product Properties. Access to Parent component properties Parent <Parent's Item Properties keywords> - Gets required value according keyword combination. Parents(<Symbol of delimiter>). <Parent's Item Properties keywords> - Gets required values list according keyword combination. TopParent. <Parent's Item Properties keywords> - Gets required value according keyword combination. Access to File Name and location properties FullFileName - Gets Component Path and Full File name. FileName - Gets Component Full File name. FileExtension - Gets Component file name extension. FileNameWithoutExtension - Gets Component file name without extension. FilePath - Gets Component File location Path. FileDrive - Gets Component File location drive name. Access to Autodesk Inventor BOM view Properties PartsBOMPositionNumber - For Assembly returns Empty value. StructureBOMPositionNumber - Gets the number of Position from Inventor Structured First Level BOM View. If this BOM view is not required returns Empty value. StructureBOMAllLevelPositionNumber - Gets the number of Position from Inventor Structured All Level BOM View. If this BOM view is not required returns Empty value. RawOrder - Gets component order number in assembly. Access to Image properties Image - Outputs Thumbnail image of assembly in original size Image(<square area size in pixels for image output>) - Outputs scaled Thumbnail image of assembly
|
|
Code - Part Component iProperty "Part Number" value. For Purchased components this value can be replaced with another one by Material Replace procedure. Name - Part Component iProperty "Description" value. For Purchased components this value can be replaced with another one by Material Replace procedure. Original. Code - Part Component iProperty "Part Number" value. Name - Part Component iProperty "Description" value. Number - Order number in current assembly BOMType - Possible values: Normal Purchased Inseparable Phantom Reference Quantity - Amount of occurences in an assembly. In case of Part List type BOM returns amount of occurences in all product. Type - Possible values: Part SheetMetal SweepProfile CategoryName - Return value: Part CustomiProperty. <Custom iProperty Name> - Gets specified component iProperty. HolesCount - Outputs amount of holes in a part. Access to Product Properties ManufacturingOrderCode - Manufacturing Order Code specified in Product Properties. ManufacturingOrderName - Manufacturing Order Name specified in Product Properties. SalesOrderCode - Sales Order Code specified in Product Properties. SalesOrderName - Sales Order Name specified in Product Properties. Access to Parent component properties Parent. <Parent's Item Properties keywords> - Gets required value according keyword combination. Parents(<Symbol of delimiter>). <Parent's Item Properties keywords> - Gets required values list according keyword combination. TopParent. <Parent's Item Properties keywords> - Gets required value according keyword combination. Access to File Name and location properties FullFileName - Gets Component Path and Full File name. FileName - Gets Component Full File name. FileExtension - Gets Component file name extension. FileNameWithoutExtension - Gets Component file name without extension. FilePath - Gets Component File location Path. FileDrive - Gets Component File location drive name. Access to Autodesk Inventor BOM view Properties PartsBOMPositionNumber - Gets the number of Position from Inventor Parts Only BOM View. If this BOM View is not required returns Empty Value. StructureBOMPositionNumber - Gets the number of Position from Inventor Structured First Level BOM View. If this BOM view is not required returns Empty value. StructureBOMAllLevelPositionNumber - Gets the number of Position from Inventor Structured All Level BOM View. If this BOM view is not required returns Empty value. RowOrder - Gets component order number in assembly. Access to Size properties Length - Length value according W4INV Units setup. Width - Width value according W4INV Units setup. Thickness - Thickness value according W4INV Units setup. Sizes. Length; X - Part Length. Width;Y - Part Width. Thickness;Z - Part Thickness. LengthUnderscore;UnderscoreX - Part Length. Output of value is underscored in a cell according Edge Band legend. 1 score - Edge banded 1 Edge, two scores - Edge Banded 2 edges. WidthUnderscore;UnderscoreY - Part With.Output of value is underscored in a cell according Edge Band legend. 1 score - Edge banded 1 Edge, two scores - Edge Banded 2 edges. ThicknessUnderscored;UnderscoreZ - Part Thickness. Output of value is underscored in a cell according Edge Band legend. 1 score - Edge banded 1 Edge, two scores - Edge Banded 2 edges. RawLength;RawX - Part Length without covers. RawWidth;RawY - Part Width without covers. RawThickness;RawZ - Part Thickness without covers. ModelLength;ModelX - Autodesk Inventor model Length ModelWidth;ModelY - Autodesk Inventor model Width ModelThickness;ModelZ - Autodesk Inventor model Thickness Access to CNC manufacturing properties Jobs. Count - Amount of Jobs for this part. Name(<Symbol of delimiter>) - Job names list divided by delimiter symbol. Jobs[<Job Order Index>]. Name - Name of specified Job. Clampings. Count - Amount of Clampings in the Job. Corner(<Symbol of delimiter>) - Possible values: FrontLeft FrontRight BackLeft BackRight CornerName(<Symbol of delimiter>) - Outputs all Corner Names of Clampings. This value is depends of language settings of W4INV. BodyType(<Symbol of delimiter>) - Possible values: 1 – Workpiece with Oversizes. 2 – Workpiece without Oversizes. 3 – Part with all Covers. 4 – Part without side Covers. 5 – Part without Top and Bottom Covers. 6 – Part without any Covers. 7 – Workpiece with Top and Bottom Covers and Oversizes. 8 – Workpiece with Top and Bottom Covers and without Oversizes. 9 – Workpiece with Oversizes and Sizing Allowance. 10 – Workpiece with Oversizes Sizing and Top and Bottom Covers CNCBasePoint(<Symbol of delimiter>) - Possible values 1 – Top Front Left corner point on processed workpiece. 2 – Top Front Right corner point on processed workpiece. 3 – Top Back Right corner point on processed workpiece. 4 – Top Back Left corner point on processed workpiece. 5 – Bottom Front Left corner point on processed workpiece. 6 – BottomFront Right corner point on processed workpiece. 7 – Bottom Back Right corner point on processed workpiece. 8 – Bottom Back Left corner point on processed workpiece. Name(<Symbol of delimiter>) - Outputs all Clamping names in this Job. CNCPrograms(<Symbol of delimiter>) - Outputs all CNC program file names generated for specified Job. CNCProgramsPath(<Symbol of delimiter>) - Outputs all CNC program file names with full path generated for specified Job. Clampings[<Number index of Clamping]. Corner - Possible values: FrontLeft FrontRight BackLeft BackRight CornerName - Outputs all Corner Names of Clampings. This value is depends of language settings of W4INV BodyType - Possible values: 1 – Workpiece with Oversizes. 2 – Workpiece without Oversizes. 3 – Part with all Covers. 4 – Part without side Covers. 5 – Part without Top and Bottom Covers. 6 – Part without any Covers. 7 – Workpiece with Top and Bottom Covers and Oversizes. 8 – Workpiece with Top and Bottom Covers and without Oversizes. CNCBasePoint - Possible values: 1 – Top Front Left corner point on processed workpiece. 2 – Top Front Right corner point on processed workpiece. 3 – Top Back Right corner point on processed workpiece. 4 – Top Back Left corner point on processed workpiece. 5 – Bottom Front Left corner point on processed workpiece. 6 – BottomFront Right corner point on processed workpiece. 7 – Bottom Back Right corner point on processed workpiece. 8 – Bottom Back Left corner point on processed workpiece. Name - Outputs the Clamping name. CNCPrograms - Outputs CNC program file name generated for this clamping. CNCProgramsPath - Outputs CNC program file name with full path generated for this specified clamping. Access to Workpieces Properties FillWorkpiece. Code - Created automatically by conventions defined in W4INV settings. Name - Created automatically by conventions defined in W4INV settings. Quantity - Amount of this workpiece in the part. Type - Possible values: Single Composite Multilayer CategoryName - Return value: Workpiece NeedsProcessing - answers to question about need further processing of workpiece after rectangular cut from raw material. Possible return values: True False Access to Size Properties Length - Length value according W4INV Units setup. Width - Width value according W4INV Units setup. Thickness - Thickness value according W4INV Units setup. Sizes. Length; X - Workpiece Length. All oversizes included Width;Y - Workpiece Width. All oversizes included. Thickness;Z - Workpiece Thickness. All oversizes included LengthUnderscore;UnderscoreX - Workpiece Length. All oversizes included. Output of value is underscored in a cell according Edge Band legend. 1 score - Edge banded 1 Edge, two scores - Edge Banded 2 edges. WidthUnderscore;UnderscoreY - Workpiece With. All oversizes included. Output of value is underscored in a cell according Edge Band legend. 1 score - Edge banded 1 Edge, two scores - Edge Banded 2 edges. ThicknessUnderscored;UnderscoreZ - Workpiece Thickness. All oversizes included. Output of value is underscored in a cell according Edge Band legend. 1 score - Edge banded 1 Edge, two scores - Edge Banded 2 edges. RawLength;RawX - Workpiece Length without oversizes. RawWidth;RawY - Workpiece Width without oversizes. RawThickness;RawZ - Workpiece Thickness without oversizes. SizedLength;SizedX - Workpiece Length with oversizes and without sizing allowance SizedWidth;SizedY - Workpiece Width with oversizes and without sizing allowance SizedThickness;SizedZ - Workpiece Thickness with oversizes and without sizing allowance Access to Oversize Properties Has Oversize - Possible values: True False Oversize. +X - Oversize value of Fill Workpiece in +X direction. -X - Oversize value of Fill Workpiece in -X direction. +Y - Oversize value of Fill Workpiece in +Y direction. -Y - Oversize value of Fill Workpiece in -Y direction. +Z - Oversize value of Fill Workpiece in +Z direction. -Z - Oversize value of Fill Workpiece in -Z direction. Access to Material Properties Material. Code - Gets replaced material Code. Name - Gets replaced material Name. Original. Code - Gets original material Came. Name - Gets original material Name. Quantity - Gets material quantity required for production for this workpiece. Quantity is presented according W4INV Units setup. CountingType - Possible values: Volume Area Length Unit Type - Possible values: Solid Board Laminated Board Desktop Rod Width - Row material Width value according W4INV Units setup. Thickness - Row material Thickness value according W4INV Units setup. AddedProperty.<Added Property Name> - Added Property from material replacement procedure. Access to Material Image properties Image - Outputs image of material appearance from replacement procedure in original size Image(<square area size in pixels for image output>) - Outputs scaled image of material appearance from replacement procedure Acces to Coloring Property Color. HasGrain - Possible values: True False Code - Gets replaced color Code. Name - Gets replaced color Name. Original. Code - Gets original color Came. Name - Gets original color Name. AddedProperty.<Added Property Name> - Added Property from material replacement procedure. Access to Coloring Image properties Image - Outputs image of color appearance from replacement procedure in original size Image(<square area size in pixels for image output>) - Outputs scaled image of color appearance from replacement procedure Access to Cutting angle properties <Side Index: Left, Right, Front, Back>. CuttingAngle <(delimiter)> - Slant angle of edge fromTop side of Part
CoverWorkpiece. <Side Index: Left, Right, Front, Back, Top, Bottom, Inward>. Code - Created automatically by conventions defined in W4INV settings. Name - Created automatically by conventions defined in W4INV settings. Quantity - Amount of this workpiece in the part. Type - Possible values: Single Composite Multilayer CategoryName - Return value: Workpiece Legend - Outputs covering legend of specified side according Legend Template set in Design Settings. Access to Size properties Length - Length value according W4INV Units setup. Width - Width value according W4INV Units setup. Thickness - Thickness value according W4INV Units setup. Access to Oversize Properties Has Oversize - Possible values: True False Oversize. +X - Oversize value of Fill Workpiece in +X direction. -X - Oversize value of Fill Workpiece in -X direction. +Y - Oversize value of Fill Workpiece in +Y direction. -Y - Oversize value of Fill Workpiece in -Y direction. +Z - Oversize value of Fill Workpiece in +Z direction. -Z - Oversize value of Fill Workpiece in -Z direction. Access to Material Properties Material. Code - Gets replaced material Code. Name - Gets replaced material Name Original. Code - Gets original material Came. Name - Gets original material Name. Quantity - Gets material quantity required for production for this workpiece. Quantity is presented according W4INV Units setup. CountingType - Possible values: Volume Area Length Unit Type - Possible values: Solid Board Laminated Board Desktop Rod Width - Row material Width value according W4INV Units setup. Thickness - Row material Thickness value according W4INV Units setup. AddedProperty.<Added Property Name> - Added Property from material replacement procedure. Access to Material Image properties Image - Outputs image of material appearance from replacement procedure in original size Image(<square area size in pixels for image output>) - Outputs scaled image of material appearance from replacement procedure Acces to Coloring Property Color. HasGrain - Possible values: True False Code - Gets replaced color Code. Name - Gets replaced color Name. Original. Code - Gets original color Came. Name - Gets original color Name. AddedProperty.<Added Property Name> - Added Property from material replacement procedure. Access to Coloring Image properties Image - Outputs image of color appearance from replacement procedure in original size Image(<square area size in pixels for image output>) - Outputs scaled image of color appearance from replacement procedure Access to Cutting angle properties <Side Index: Left, Right, Front, Back>. CuttingAngle <(delimiter)> - Slant angle of edge from specified side of Part
|
|
This keyword chart presented as a XMind map can be downloaded from here.
XMind software supporting the map can be downloaded by clicking on the link http://www.xmind.net/download/win/.
This keyword chart presented as a PDF file can be downloaded here.