Panel copying

Top | Previous | Next

 

This command is used to create panel bodies based on the selected face of the existing panel body.

 

Opening the Command

 

The command can be opened only in the part design environment.

 

Skeleton Dress Up –> Clone Dress Up Clone panel

 

 

Dress Up Clone Panel dialog

 

 

Once the command has been activated, it is first necessary to select the face of the existing panel body; new panel body will be created in parallel with it.

 

Offset - select the distance of shifting the imaginary reference face used as a reference point for creating the panel body.

 

Dress Up Side indicator for Clone - direction of shifting the reference face, which can be reversed.

 

 

 

There are the following options available for the position of the panel body with regard to the reference plane:

 

 

Dress Up Clone Panel position to meaning offset plane - the panel body will be created in the negative direction from the normal of the imaginary plane. The normal of the imaginary plane will coincide with the normal of the selected panel plane.

 

Dress Up Clone Panel position to meaning offset plane UP - the panel body will be created in the positive direction from the normal of the imaginary plane.

 

Dress Up Clone Panel position to meaning offset plane SYM - the panel body will be created symmetrically to the imaginary plane.

 

 

Thickness - indicates the thickness of the panel.