Grooving operation settings |
Top | Previous | Next |
Grooving operation has parameters controlling various aspects of the technology being created, such as: cutting type, saw landing type, etc. The technology is created for all spindles included in the configuration of the machine, thus grooving operation settings may differ for the processing using top oriented or free oriented spindle. Therefore, the software allows the user to adjust these aspects separately for top oriented and free oriented spindle.
These settings are accessed from the grooving operation settings tab.
1. Orientacijos Selektorius |
Selektorius leidžia pasirinkti, kokiai špindelio orientacijai bus taikomi žemiau užrašyti nustatymai. Yra galimi šie pasirinkimai:
Svarbu žinoti. Kuomet sakoma, kad pjūklo špindelis yra orientuotas iš viršaus (skirtingai nuo kitų įrankių tipų analogiško aprašymo), tai turima omeny, kad pjūklas atlieka pjūvį viršutinėje detalės plokštumoje. Tokio špindelio su pjūklu pasukimo erdvėje laisvės laipsnį aprašantis orientacijos vektorius bus apribotas kryptimi, kuris sutampa su viršaus plokštuma. Tuo tarpu frezoms ir gražtams turima omeny kryptis, kuri yra normalinė viršutinei detalės plokštumai. Apie špindelio orientacijos ribojimus erdvėje plačiau skaitykite čia. Kiekvienai orientacijai gali būti nustatomas kitas špindelis ir nustatomi skirtingi operacijos vykdymo parametrai.
|
||||
Groove Spindle |
Selektoriuje nustatytai špindelio orientacijai parenkamas staklių špindelis. Žemiau šiam špindeliui yra nustatomi CAM sprendiklio kuriamos operacijos parametrai.
|
||||
Groove cutting type |
Setting the cutting type. To read more, click here.
|
||||
Tool landing type to closed groove ends |
Setting saw landing and lifting type with closed groove ends. To read more, click here.
|
||||
Cleaning Pass |
Turns on or off the cleaning pass of the saw. To read more, click here.
|
||||
Cleaning pass offset |
Setting the distance from the cut groove surface, at which the saw has to be lifted during the cleaning pass. This parameter is also used in the Woodwork for Inventor CAM module, when the operation is created as usual.
|
||||
Max groove with |
Setting the width of a part model, for which, when recognized, the groove has to be processed using a saw, and the width, from which it will be deemed that it is better to process the groove using an end mill. The parameter is also used in the Woodwork for Inventor CAM module, when groove geometry is automatically selected from the part model for the operation. |