Kuomet, atsižvelgiant į įrenginį ir įmonės vidaus susitarimus, yra tinkamai sukonfigūruoti CAM sprendiklio (CAM solver) nustatymai, tuomet galima taikyti automatinį CNC technologijų generavimą.
Komanda pasiekiama:
Woodwork Design->Technology->Auto
Paleidus komandą, automatiškai generuojmos CNC technologijos visoms Woodwork for Inventor detalėms, esančioms atidarytame junginyje.
Prieš generuojant CNC technologijas galimos šios opcijos:
|
In cases, where the command was activated in the assembly editing environment, it will be possible to select components for which CNC technology will be generated. This is not possible in the part editing environment. Once the command has been activated, all Woodwork for Inventor components will be assembled by default. You can:
|
|||||||
Router |
Iš iškrentančio sąrašo pasirenkamos CNC staklės, kurioms bus atliekamas CNC technologijų sudarymas. Jeigu naudojamas nurodymas "Use CNC equipment by Material Settings", tokiu atveju yra naudojamas įrenginys, kuris yra nurodytas nustatant CNC apdirbimo įrenginius medžiagai. Jeigu medžiaga neturi priskirto CNC įrenginio, tai tokio pasirinkimo atveju detalei, kurios medžiaga neturi priskirto CNC įrenginio, CNC technologija nebus sukurta. Nurodant konkretų įrenginį CNC, technologija bus suskurta neatsižvelgiant į medžiagos nustatymus.
|
|||||||
Recreate CNC technology from scratch |
If CNC technologies were previously created for the part, the CNC technology generator will first delete previous technologies and then create new CNC technology from scratch.
|
|||||||
Use existing technology data |
Operating modes of the command specified below will use or save the data of already created technology to a certain extent.
|
|||||||
|
Add new jobs to existing technology |
If the job has already been created, it will be saved. Then, a new job will be created and the CNC technology will be stored in its container.
|
||||||
|
Recreate clampings in existing job. |
All contents of the existing job will be deleted and new CNC technology will be created under it.
|
||||||
|
Add new clampings to existing job |
All the previously created CNC technology will be saved in the existing job, while newly created CNC technology will be incorporated as newly created clamping options for the part with all the relevant operations.
|
||||||
|
Recreate operations in existing clampings |
Clamping operations in the existing CNC technology will be deleted and recreated.
|
||||||
|
Add new operations to existing clampings |
Newly generated CNC operations will be added to the operations set for the clamping options in the existing CNC technology.
|
||||||
Delete existing technology |
All CNC technologies will be deleted. No new CNC technology will be created. |
|||||||
