Command description

Top | Previous | Next


To open the Mill command, go to:


Woodwork CAM -> Mill Mill Icon


A dialog window will appear once you open the command.


Mill Dialog


To successfully run the command, the user should follow a certain sequence for specifying data. Below you will find the description of the control of the command in the sequence that needs to be followed when performing tasks in the mill command window.


hmtoggle_plus1Selecting the spindle
hmtoggle_plus1Selecting geometry in the mill command
hmtoggle_plus1Setting the tool position with respect to the contour being milled
hmtoggle_plus1Landing of the tool to the starting point of the trajectory
hmtoggle_plus1Defining the approach to and withdrawal from the trajectory
hmtoggle_plus1Setting the trajectory correction type
hmtoggle_plus1Setting a milling option for corner recesses
hmtoggle_plus1Setting breakthrough for milling
hmtoggle_plus1Setting oversize for milling